Logic lives in every Datum

Control logic you can actually read

Each Datum can carry its own Formula. Write it as text or build it as a flowchart, and EMCc compiles one into the other and back. No ladder diagrams, no separate PLC program to hunt through.

Take the tour Request a demo

~100 built-in functions · strict left-to-right evaluation · built-in hysteresis

Virtual Datum, Groups, Timers and Clocks

The building blocks that turn raw readings into a running site.

Virtual Datum

New values calculated from other Datum, such as site net load or kWh. Set the frequency to 0 to make a dashboard switch.

Groups & Super Groups

Organize Datum by system, building or customer, then group the groups.

Timers & Clock Wizards

Unlimited actions after a delay or at a date and time, and Formulas can change them.

Totals & accumulators

Hourly, daily, weekly, monthly, yearly and lifetime totals, including kWh.

Text or flowchart

Compile text to a flowchart and de-compile it back. Same logic, whichever way you think.

Global Variables & User Functions

Around 100 built-in functions, plus your own, available to any Formula.

Read · Formula · Store

Each Datum can carry its own Formula

The device returns a value. An optional Formula decides, controls or alerts. The result is stored in current and historical tables. This one runs grid charging for a battery.

Read

The device returns a value: PV kW, battery SOC, total load.

Formula

Optional logic that decides, controls or alerts, with hysteresis against short cycling.

Store

Current and historical tables, ready for graphs, totals and dashboards.

Take the tour Request a demo

E = mc2

// Assign datum IDs to variables (optional)

A = #240    // Auto Formula switch
P = #181.24 // Total PV kW
B = #116    // Battery SOC
L = #209    // Total Load
G = #220    // Manual Grid Charge override
C = #       // Current latched state

IF (G == 1) // Manual override forces charging ON
  C = 1
ELSEIF (A == 0) // Auto is OFF: grid charging OFF
  C = 0
ELSEIF (B <= 10) // Start charging at SOC <= 10%
  C = 1
ELSEIF (B >= 50) // Stop charging at SOC 50%
  C = 0
ELSEIF (B >= 20) // Stop at 20% if PV > Load
  IF (P > L)
    C = 0
  ENDIF
ENDIF
SDEVICE # = C

See a real site, live

We'll connect to a working EMCc site over a secure VPN tunnel and show you Datum, Formulas, alarms and dashboards, edited live while the site keeps running.

Request a demo

Efficiency = Monitoring & Control Capability

EMC2 Technologies builds EMCc, a hardware-agnostic monitoring and control platform for microgrids and energy storage. Made in Hawaii.

Request a demo

Explore

Contact

info@emc2tech.com

support@emc2tech.com

Hawaii, USA

Platform

Parallel by design

Configured, not programmed

Agnostic all the way down